Hello,
We are installing a VM that requires a trunk port and through the VM we will tag the vlans. I have created a vnic on vlan 4095. Below is the cisco config of the port.
I am tagging the vm with a vlan 50. ICMP is enabled on the box, but I am unable to ping it. The vlan is allowed in the switch. On a different VM I have vlan 50 working as untagged. I am using 6.5
What am I missing?
--------------------------------------------------------------
interface GigabitEthernet0/5
switchport trunk encapsulation dot1q
switchport trunk native vlan 30
switchport mode trunk
spanning-tree portfast trunk