DRBL/Clonezilla Server VM on ESXi 6.7 - PXE problem
My configuration:30 PC (Windows 10) --->Cisco Switch (default conf)----->ESXi((physical 192.168.80.2)----->vswitch(default conf)-------->(192.168.80.5)DRBL/CZillla(public...
View Articlevmkernel and vmkwarning log flooded
Hi, Could anyone tell me what this mean?This two log files are constantly flooded by this warnings: 2019-12-19T12:06:37.203Z cpu12:2101773)WARNING: UserSocketInet: 4195: nfcd: Net_RegisterCallback...
View ArticleClik here to view.
NFS and IP reconfiguration
I've inherited an ESXI host with a NFS datastore that's currently mounted and in use. Unfortunately, the ESXI host doesn't have an IP that's in the same subnet as the datastore so all that storage...
View ArticleInstall only ESXi security patches
Hi, is it possible to install only the current security patches but don't go to a higher version(U3)? For Example: im running "ESXi U2 13006603" and i want to install the current security patches. Do I...
View ArticleRemove snapshot stuck at 99%
Hi all, i try to remove snapshot, but it stuck at 99% since 13 hours.i can't start my vm because all option are grey... do you know mean to stop removal job ? or start muy vm ? it's important vm and i...
View ArticleIPV6 + ipsec removing SAs breaks esxcli API
Hi,I am facing a problem on 6.0.0 and 6.7.0 esxi's that adding new sa + sp, then deleting them will leave the system broken. Haven't tried rebooting, but nothing seems to recover to the level where I...
View ArticleClik here to view.
como configurar o Vmware remote console no Mac
como configurar o Vmware remote console no Mac baixo o app no link oficial da Apple Vmware, ele intala, e nada acontece VMware Remote Console na Mac App Store precisa de alguma configuraçao especial?
View ArticleIntel NUC7 i7 DNHE & VMWare 6.5, 6.7: Installation hangs
Hi all, I just got a brand new Intel NUC7. When installing the device, the procedures always hangs (or: seems to hang) at "initializing storage stack". I have done some searching but I didn't find any...
View ArticleClik here to view.
not able to install Esxi 5.0
Dear All, I am trying to install ESXi 5.0 / 5.5 in IBM X3650M4 (7915) Server. i am getting attached error. I tried a lot with Firmware Upgrade / Downgrade, Install with different images, with removing...
View ArticleUnable to increase DQLEN on Dell H740p adapter
Hi all, I have a setup that doesn't get the performance I expected. The current datastore that I have created is dedicated to my testing VM. I test the performance with the following command: fio...
View ArticleESXi 6.5 network "mess" - GUI / system mismatch
Hi All, Got a strange one going on there. I was trying to configure a new virtual switch and got the "specified parameter is not correct". So logged to the command line and the output of esxcfg-vswitch...
View ArticleHP Proliant dl385 g7 Running esxi 6.5
Hi all iv got a hp dl385 g7 running esxi 6.5.Iv found out the the server can handle passthought its self but does that also applie if i get a graphics card that has IOMMU intergrated. Just seeing what...
View ArticleSSD flash HGST-Ultrastar-SN260-NVMe problem
I have a SSD Flash HGST-Ultrastar-SN260-NVMe in an SuperMicro server.I install VMWare 6.7. And i did not se any device for this adapter.I see that the adapter is on HCL and have the right firmware and...
View ArticleUnable to take quiesced snapshot
After a reboot of a server, it can happen that it is not possible to take a quiesced snapshot.It happened after an update to 6U1 from 6.0. Before the update there were no problems. We did the following...
View Articleerror upgrading esxi 5.5 to 6.0 with command line esxcli
Hello,I have a remote ESXi server which needs to be migrated from version 5.5 to version 6.0 using command line, and a version 6.0 depot (ESXi-6.0.0-2494585-standard-depot.zip)My server is version...
View ArticleClik here to view.
ESXi 6 boot Stuck on "nfs41client loaded successfully "
Hello, After a power failure, ESX won't boot and stuck on nfs41client loaded successfully. It's ESXi 6 Build 5050593 on a USB. I tried to upgrade ESX to 6.7 U3 to no avail: Vibs on the host are...
View ArticleClik here to view.
ESXI 6.7 Error Host hardware sensor state
hi dearsi have 4 vmware esxi6.7 14320388 on proliant DL380 G10 s ensor -1 type description intel corporation c620 series .... .all hp servers updated via hp spp 2019.09 . how can i solve it?thanks alot
View ArticleClik here to view.
Esxi Crash After Turn On VMs
HiWhen i Turn on Vms with Hard > 2GB , My Esxi Crash.but when Turn On Small VMs , ESXI Work Without any Problem What Can I do?
View ArticleClik here to view.
Error: Operation failed with error = ERROR_NOT_ENOUGH_MEMORY (8) (8)
vcenter 6.7.0 and hosts 6.7.0.I can not connect hosts to vcenter. on hosts there is a license, entered the domain.What to do?thanks! A general system error occurred: Unable to get signed certificate...
View ArticleEsxi host does not respond to ping
Hi all, I am trying to set up learning lab with ESXi. I loaded esxi 6.5 and assigned static address.I can ping the address: 192.168.1.72 which is the host.If I ping the name Home150 it is unable to...
View Article